MIMAKI CG-160FXII Plus

MIMAKI CG-160FXII Plus

SPECIFICATIONS

Acceptable sheet width 

90mm~1,880mm (3.54"~74")

Rolled media weight

22kg (49 lb) or less

Roll outsied diameter

φ200mm (7.87") or less

Effective cutting area 

1,600mm×51m (62.9"×167’)

Maximum auto cutting width 

1,720mm (67.7")

Maximum cutting speed

100cm/s (39.3"/s)

Maximum moving speed

140cm/s (55"/s) (In a 45° direction and in a pen-up state)

Adjustable speed range 

1-10cm/s : 1cm step adjustment

(0.39"-3.94"/s : 0.39" step adjustment)

10-50cm/s : 5cm step adjustment

(3.94"-19.68"/s : 2" step adjustment)

50-100cm/s : 10cm step adjustment

(19.68"-39.37" : 3.94" step adjustment)

Mechanical resolution

5µm (0.0002")

Command resolution

25μm, 10μm(MGL-IIc), 100μm, 50μm(MGL-Ic1)

Repeatability

±0.2mm (Excluding shrinkage / expansion caused by the film temperature)

Accuracy assurance range (Repeatability)

1,600mm x 10m (63.0" x 32.8')

Max. pressure

500g

Range of down pressure

Cutter: 10~20g(2g step), 20~100g(5g step), 100~500g(10g step)

Pouncing: 10~20g(2g step), 20~100g(5g step), 100~500g(10g step)

Pen: 10~20g(2g step), 20~100g(5g step), 100~150g(10g step)

Acceptable sheet 

Vinyl up to 0.25mm(0.01")thickness, Fluorescent type vinyl Reflective sheet

Acceptable sheet for pouncing 

Paper thickness: 0.06~0.13mm (0.0024"~0.005")

Applicable tools 

Cutter, Water based ball-point pen, Oil based ball-point pen, Pouncing tool

Certifications

VCCI class A, FCC class A, ETL IEC 60950-1

CE Marking (EMC, Low voltage, Machinery directive, and RoHS),

CB, REACH, RCM, EAC

Type of command

MGL-II c / I c1

Interface

RS-232C, USB

Receiver buffer size

30MB Standard (20MB when in sorting)

Operational environment

Temperature: 5~35°C (41~95°F), 35%–75% RH (Non-condensing)

Power requirement

AC100V~240V　1A 50/60Hz

Power consumption

100W or less

Dimensions (WxDxH)

2,125mm(83.6")x

700mm(27.5")x

1,217mm(47.9")

Weight (with stands)

70kg (154 lb)